HSM 405H4 8WD

Fig. with Epsilon X270 H107 crane

Technical data 405H4 8WD

Engine (6 cylinder):
  • VOLVO PENTA
    TAD884VE EU Stage V
    Power: 250 kW (340 HP) from 1800 rpm
    Max. revolution: 1330 Nm from 1200 - 1800 rpm
    Max. torque 1360 Nm at 1400 rpm
    Displacement: 7,7 liters
Transmission:
  • Hydrostatic-mechanical
  • NAF 2-speed transfer gearbox
Axles:
  • NAF balanced portal tandem axles
  • Front: 100 % selectable differential lock
  • Rear: 100 % selectable differential lock
Brake:
  • 2-circuit brake, disk brakes running in an oil bath
  • Spring-loaded parking brake
Steering:
  • Articulated steering with 2 cylinders
  • 2 steering cylinders, 50° steering angle
Tyres:
  Size: Total width:
Series: 750/55-R26,5 at 2900 mm
    3000 mm tapes and chains
Optional: 650/55-R26,5 2900 mm tapes and chains
Tank capacity:
  • Diesel: 500 l
  • AdBlue: 45 l
  • Hydraulic oil: 250 l
Hydraulic system:
  • Load Sensing
  • Variable pump (working pump):
    crane pump: 190 cm3
    head pump: 190 cm3
    flow rate: 532 l/min at 1400 rpm
    pressure: up to max. 380 bar
  • Hydraulic oil:
    saturated synthetic ester
    Panolin HLP SYNTH with Kleenoil
    Microfiltration; WGK 1
Cabin:
  • Height-adjustable at the front / rear +10° / -29°
  • Bent Lexan windscreen
  • Windscreen wipers in the front and at the side
  • ROPS, FOPS, OPS tested
  • Tested safety cab
  • Air cushioned seat with seat heating
  • Hot water heating
  • Auxiliary heating with cooling water and hydraulic oil preheating
  • Air conditioner
  • Optional height-adjustable and rotatable (270°),
    front / rear +10° / -12°, (restricted to -24°) lateral +/- 9°
  • Optional: Sun blinds
Electrics / Instruments:
  • HSM Ecommand colour-display
  • 5 operator programs + factory setting
  • Diagnosis-tool and error-indication
  • Graphic support at parameter editing
  • Generator 110 A (28 A)
  • 2 service-free dry batteries á 75 Ah
Weight:

  • from 29.200 kg

Torsion lock:

  • 2 hydraulic cylinders

Crane:
  • Epsilon X270 H107
    Range: 10,9 m
    Lifting moment gross: 360 kNm
    Slewing torque: 92 kNm
    Slewing angle: 260°
    Tilt angle: +24°/-30°

    Optional:

  • HSM H4-15
    Range: 15 m
    Lifting moment gross: 380 kNm
    Slewing torque: 92 kNm
    Slewing angle: 260°
    Tilt angle: +24°/-30°
Aggregate:
  • Logmax 6000
    Felling diameter: 650 mm
    Delimbing diameter: 500 mm
    Gross lifting moment: 26,9 kN
    Max. feed force speed: 4,2 m/s
    Max. operating pressure: 280 bar
    Weight: 1.330 kg
  • Control: LOG Mate
  • Other aggregates on request
Standard equipment:

  • 20 LED work lights on the cab, 4 work lights in front of the crane, 2 LED work lights on the crane column, 2 LED work lights on the rear frame, bogie lift front separately switchable, voltage converter on-board voltage 24 V to 12 V, end cushioning for crane and steering cylinder, radio, fire extinguisher, first-aid kit, warning triangle, tool set, bypass filter, Diesel fill pump, hydraulic fill pump, vacuum pump

Special equipment:
  • GPS system
  • Data transfer
  • Bogie lift engine carriage
  • Attachement steep slope winch, traction constant 120 kN, max. 150 kN
  • Air compressor 24 V
  • Guard bracket bonnet

HSM Crane-list 405H

Crane M221 H100:
Lifting moment gross 188 kNm
Slewing torque 43,6 kNm
Slewing angle 260°
Crane M240 H103:
Lifting moment gross 240 kNm
Slewing torque 54 kNm
Slewing angle 260°
Crane M280 V110:
Lifting moment gross 280 kNm
Slewing torque 65 kNm
Slewing angle 260°
Crane X270 H107:
Lifting moment net 270 kNm
Slewing torque 92 kNm
Slewing angle 260°
Crane HSM H4-15:
Lifting moment gross 380 kNm
Slewing torque 80 kNm
Slewing angle 260°