HSM 954H2

Technical data 954H2

Engine (6 cylinder):

  • VOLVO PENTA
    TAD882VE EU Stage V
    Power: 210 kW (286 HP) from 1700 rpm
    Max. revolution: 1225 Nm from 1100 - 1600 rpm
    Max. torque: 1255 Nm at 1400 rpm
    Displacement: 7,7 liters

Transmission:

  • 904H: HSM High Speed Drive (series 71)
    speed at 1st gear 0-14 km/h

Axles:
  • Planetary axles
  • 100 % separately selectable differential locks, front and rear
Brake:
  • 2-circuit brake, disk brake running in an oil bath
  • Spring-loaded parking brake
Steering:
  • Articulated steering with 2 cylinders
  • 45° steering angle
Tank capacity:
  • Diesel: 360 l
  • AdBlue: 45 l
  • Hydraulic oil: 160 l
Hydraulic system:
  • Load sensing
  • Variable pump (working pump) 904H:
    flow rate: 304 l/min bei 1600 rpm
    pressure: up to max. 350 bar
  • Hydraulic oil: Saturated synthetic ester
    Panolin HLP SYNTH with Kleenoil
    Microfiltration; WGK 1
Cabin:
  • HSM Panorama comfort cab (see brochure page 12-13)
  • ROPS, FOPS, OPS tested safety cab
  • Swivel seat device, air-suspended comfort seat
  • Heating/air-conditioning
Electrics / Instruments:
  • HSM Ecommand colour-display
  • 5 operator programs + factory setting
  • Diagnosis-tool and error-indication
  • Graphic support at parameter editing
  • Generator 110 A (28 V)
  • 2 service-free dry batteries á 55 Ah
Standard equipment:
  • 12 LED work lamps
  • 24 V - 12 V voltage transformer, radio with CD player, fire extinguisher, first-aid kit, warning triangle, tool set
  • Torsion lock with 2 hydraulic cylinders
Special equipment:
  • Tiltable front polder shield, seat area dampers, engine bonnet protection and brush guard made from tubing
  • Other accessories on request
Crane:

  • Mesera M221 H100 / H110
    Range: 10 m / 11 m
    Gross lifting moment: 188 kNm
    Pivoting moment: 43,6 kNm
    Tilt angle: +24°/-30°

    Optional:

  • Mesera M240 H103 / M111
    Range: 10,3 m / 11,1 m
    Gross lifting moment: 240 kNm
    Pivoting moment: 54 kNm
    Tilt angle: +22°/-30°

Aggregat:
  • Logmax 6000
    Felling diameter: 650 mm
    Delimbing diameter: 500 mm
    feed force: 26,9 kN
    Max. feed force speed: 4,2 m/s
    Max. operating pressure: 280 bar
    Weight: 1.330 kg
  • Control: LOG Mate
  • Other aggregates on request
Weight:

  • from 20.000 kg

Tyres:
    Standard
24,5-32		  
30,5-32
954H D 1831 1857
  B* 2680 2980
  H 3721 3726
  F 713 715

* B: minimum machine width (dimensions in mm)

Downloads